Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute

You looking to find the "Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute" Good news! You can purchase Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $1,396.06    

Product Feature

• Endless hot water, On-demand usage, Compact, Space saving, Energy conservation
• Computerized safety features, No pilot light to have to worry about
• Satisfies the 2012 SCAQMD Rule 1146.2 for Ultra-Low NOx Emissions

Product Description

With gas inputs of 199,000 BTU, the T-H3 can produce enough hot water for four bathrooms in warmer climates or three baths in colder climates.

Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute Review

This is one hot-hot water heater. It heats water really well. If you're planning to install this yourself, figure on two days of work and two hardware store runs before you have hot water again. Make sure the family is prepped for that, or out of town!

Takagi water heaters are very well made, and installation is straightforward. The surprises are going to come from the site selection (probably where your big old tank water heater was) and getting the water pipes, gas pipe, and an electrical outlet lined up. Typically tank water heaters have their gas connection near the floor and the water lines near the ceiling, with tankless the connections are all along the bottom face of the machine.

Takagi is now owned by AO Smith. Many of the accessories are sold under the AO Smith label with identical part numbers to the Takagi counterparts. You must buy the valve kit: AO Smith 9007604005 Isolation Valve Kit and you may need the acid neutralizer kit in some water districts: AO Smith 9007607005 Neutralizer Kit

These new high-efficiency condensing heaters do not require stainless steel exhaust vents, PVC is fine. They really do get all the heat out of the gas burner and leave very little in the exhaust air. A clerk at my local Home Depot insisted I needed schedule 80 CPVC (they sell a comparable tankless heater by Rheem), but the Takagi instructions (and Rheem's, for that matter) are clear that schedule 40 and 80, PVC and CPVC, and ABS, are all acceptable. I recommend bringing the installation manual with you to the hardware store, just in case your local hardware store clerk becomes unnecessarily helpful and all in a huff about your materials selection.

These new high-efficiency condensing heaters generate a lot of slightly acidic condensate water! You'll need to have a drain nearby to drop a small hose into (not included, which is slightly annoying because that's the one accessory everyone needs and isn't very site-specific). Initially I didn't have the hose, and put a bucket underneath the condensate outlet, and three showers later (see above and remember to prep the family for two days without hot water...) there was about half a gallon of warm condensate.

Most of the consumer Reviews tell that the "Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute" are high quality item. You can read each testimony from consumers to find out cons and pros from Takagi T-H3-DV-N Condensing High Efficiency Natural Gas Indoor Tankless Water Heater, 10-Gallon Per Minute ...